Tensile Strength Test Of Concrete Engineering Essay

Tensile Strength Test Of Concrete Engineering Essay Concrete is a widely used construction material in the world. It is one of the most versatile, durable and environmental friendly material. Most importantly concrete is good at compression and is completely non-combustible, which makes it popular in this industry. But concrete has low tensile strength causing concrete to behave in brittle manner. This nature in concrete has lead to numerous test and research in order to increase the tensile properties of concrete. History of concrete dates back several thousand years to the day of the ancient Egyptians, the Greeks and the Romans. These early concrete compositions were based on lime although the Romans are known for their development of pozzolanic cement and lightweight concrete based on pumice. The credit for the introduction of steel as reinforcement is variously attributed to Lambot in 1855 for ferrocement boats, to Monier in 1867 and to Hennebique in 1897 who built the first reinforced concrete frame building. But the Notable steps forward in this century have been the introduction of pre-stressed concrete by Freyssinet in the 1940s and the motorway-building boom of the 1960s involving concrete pavements and bridges. Although the vast majority of concrete structures have performed satisfactorily for many years such progress has not been made without its problems. 1.1 HIGH STRENGTH CONCRETE High strength is a concrete which has a cylinder compressive strength greater than 6000psi or 42 MPa. Generally, for building high rise structures, concrete with cylinder compressive strength over 140 MPa is used. In some laboratories in United States and Europe, a concrete with strength over 315 MPa has been produced, however, the problem with such strength is that it reduces the ductility of structure. Higher strength concretes leads to cost effective structural systems. Using such concrete, overall weight of the systems on the foundation reduces, resulting in size reduction, increase in available occupancy space, and thus cost of components. Many factors are taken into account for making a high strength concrete. Generally, such a concrete contains a higher Portland cement, strong aggregates, and a low water/cement ratio. Now-a-days, addition of super plasticizers, blast furnace slag, polymers, water reducing admixtures or silica fume are common 1.2 HISTORICAL DEVELOPMENT OF HIGH STRENGTH CONCRETE In last half decade, the compressive strength of commercial concrete has tripled approximately from 5,000 psi to 14,000 psi. In 1950s, a ready mixed concrete of design strength of 5000 psi was called as high strength. A decade later, Washington state highway department specified 6000 psi strength concrete for prestressed girders. High strength concrete made constructions such as 311 South Walker Drive concrete building; East Huntington, W.V., and other long span cable stayed bridges. Increased use of mineral admixtures and chemicals in 1960s lead to an increase in attainable strength. In 1973, Japan national railway built three high strength concrete bridges and they were found to meet all expectation by serving for over 20 years. Chicago city played a very important role in the evolution of commercial high strength concrete. The inventors of micro-silica concrete (MSC) realised that Chicago inner city development would be quite beneficial , which indeed was, and hence, with appointing high strength concrete pioneer, William Schmidt, they targeted an increase upto 6000 psi for a new 40 story tall Outer Drive East Condominium Project, using normal weight concrete. In 1072, the first 7500 psi concrete was used for a 52 story tall Mid-continental Plaza. Later, in 1974, 9000 psi concrete was supplied to 74 stories tall Water Tower Place, which was the tallest building at that time. In late 1980s, very high strength concrete as being successfully developed in many parts of North America. One of the best examples is Two Union Square in Seattle which is a 220 m tall, 58 story building. The original concrete specified for them was 14000 psi at 28 days, however, to incorporate a static modulus of elasticity of 50 Gpa, the concrete was upgraded to a compressive strength around 19000 psi. A test conducted after 4 years found that the compressive strength and modulas of elasticity were 19900 psi and 5.6 Gpa, respectively. Now-a-days, 14000 psi at 56 days is commonly used in many metropolitan cities. 1.3 MOTIVE FOR DEVELOPMENT of High strength concrete Modern methods have improved the quality of concrete by many folds. Aspects such as, long term failure studies, development of effective and powerful instrumentation, molecular structure of material, increased need of materials better for larger structures and increased ductility, and decrease of cost effectiveness of traditional material have redefined concrete. These days, concrete structural systems build from 15000-20000 psi concretes can be found quite easily. However, factors such as newer components or admixtures, microstructural studies, better material selection proportioning, long term performance, blended cement compositions, placement techniques and others; provide an ample scope of improvement. For e.g., use of slags and pozzolans as cementitious replacements contribute to energy conservation and disposal of industrial by-products, besides higher strength. Improved cements such as densified cements (DSP) and macrodefect free cements (MDF) and composite advancements, for e.g., slurry infilterated fiber concrete (SIFCON), have allowed the builders to achieve concrete with strengths up to 300 MPa. A very nice example of such concrete use is the undersea tunnel connecting British Isles and France. 1.4. APPLICATIONS OF HIGH STRENGTH CONCRETE The use of high strength concrete has been increasing considerably high in construction world because of both technical and economical advantage. The use of HSC provides more economical construction due to reduced member cross-section and dimensions. HSC has been extensively used in high rise building and highway bridges. Major area of use has been high rise buildings. Tall construction feature whose construction would have been not possible in terms of durability and long term performance have been successfully constructed using HSC. The use of HSC helps in the reduction in structural member size, reinforcement percentage increasing floor space and decreasing dead weight. One of the examples of high rise building is the Mercantile Exchange building in Chicago which used 9000psi concrete. The other application of HSC is in prestressed Bridge girders. The use of HSC would allow using greater spans for a given number of girders as compared to NSC. Again for a given span, use of HSC provides economical cost by reduction in labour cost in the production of girders, transportation cost, erection cost and overhead expenses. Japanese I-shaped, box and rectangular section bridge girders have been constructed using 8500psi concrete where the spans are between 100 to 280 ft. One of the examples is Bennett Bay Bridge, Idaho which has which 1730ft segmental girder with two centre spans of 520ft and end span of 320ft. 1.5 DISADVANTAGES OF HIGH STRENGTH CONCRETE HSC has brought about a lot of construction possibilities which would not have been possible with NSC. However HSC comes with some disadvantages too mainly because of lack of research and information about its behaviour in real construction field. As HSC is composed of mineral and chemical admixture, increased quality control is required. In codes minimum thickness and cover have been specified preventing realization of full benefit of using HSC. It can be difficult to cure adequately due to self-desiccation of low water/cement ratio mixes. HSC possess increased permeability which makes curing difficult as it prevents applied curing water from compensating any initial moisture loss. These are the disadvantages relating the use of HSC in real construction filed. 1.6 RESEARCH OBJECTIVES The main objective of this research is to determine the true uniaxial tensile strength of concrete by carrying out a series of cylinder splitting test, modulus of rupture test and cylinder compression test. The research aims to utilise the simple correction factors proposed by Raoof and Lin (1999) which aims to overcome the shortcomings associated with the closed form formula used in the Brazilian concrete splitting test. Many experimental tests on various concrete mixes had been already carried out for the verification of the proposed correction factor. The criteria for this research were based on 3 days compressive and tensile strength of high strength concrete with total of 16 batches using two types of coarse aggregate. Also few batches testing were done for normal strength and self compacting concrete. In this research effect of constituent materials will also be studied. The purpose of this research is to compare and contrast the use of correction factors with the results the results obtained from previous experiments. 1.7 RESEARCH SCOPE The scope of this research included computation of splitting tensile strength, compressive strength and modulus of rupture on normal, high and self compacting concrete. The mineral admixtures, which have been used for this research project, were compromised of silica fume, fly ash. The superplasticiser and viscosity modifying admixture that was used in this research were Sika ViscoCrete10 and structure 480respectively. All the admixtures used in this research are used in real life applications. 2. LITERATURE REVIEW High strength concrete has been classified as one of the advanced construction materials. High strength concrete has both economical as well as durability benefits. It helps in the reduction in formwork area and cost with the accompanying reduction in shoring and stripping time due to high early age gain in strength. The composition of high strength concrete constitutes of mineral admixtures which provides a base for the use of waste products. 2.1 PREVIOUS RESEARCH WORK ON HIGH STRENGTH CONCRETE High strength concrete uses various mineral admixtures such as silica fume, fly ash, granulated blast furnace slag and superplasticiser which increase the strength of High strength concrete. Most applications of high-strength concrete have used the strength property of the material. However, high strength concrete may carry various other characteristics that can be of great advantage for construction industry. Various researches have been carried out on high strength concrete in order to study other characteristics of HSC. Some research work that had been carried out on high strength concrete has been summarised below: M. Mazloom A.A. Ramezanianpour, J.J. Brooks(2004): carried out in joint collaboration between UK and Iranian university presented experimental work on short- and long-term mechanical properties of high-strength concrete containing different levels of silica fume. In this research the cement was replaced by silica fume with 0%,6%,10% and 15%. The researchers found that as the proportion of silica fume is increased the workability of concrete decreased but its short-term mechanical properties such as 28-day compressive strength and secant modulus improved. The mix portion sued in this research is shown in the table below. For each mix, the following specimens were made: 24 samples of 100 mm cubes for compressive strength; eight 80 x 270 (diameter x length) mm cylinders for creep; four 80x270mm and four 150x300mm cylinders for shrinkage; two 80270 mm and two 150x300mm cylinders for swelling. From the test carried it was also established that the percentages of silica fume replacement did not have a noticeable effect on total shrinkage. Moreover the compressive strength of the concrete mixes containing silica fume did not increase after the age of 90days. K. Lahlou, P.-C. Aitcin O. Chaallal (1992): This research presents the behaviour of High-strength concrete under confined stress. The investigation was carried out on three 28 day strength levels: 50, 80 and 115 MPa where the actual mixes used resulted in strength of 47, 78 and 115MPa.The study showed that improved confinement provides increased compressive strength. As a result a new ultrahigh-strength concrete of strength 250MPa was produced. Other outcome of the research was that the confinement efficiency increased with the increase in the compressive strength of the concrete. Zhen-jun He, Yu-pu Song (2010): this is one of the most recent researches carried out in china to study the failure criterion and triaxial strength of HSC before and after high temperature. HSC is susceptible to spalling, or even explosive spalling when subjected to rapid temperature rise as in the case of a fire. Though high strength concrete has been greatly used but very little research has been carried about the effect of high temperature on the concrete structure Triaxial tests were performed at all kinds of stress ratios after exposure to normal and high temperatures of 20,200, 300, 400, 500, and 600  °C, using a large static-dynamic true triaxial machine. The study showed that no explosive spalling was observed during the high temperature temperatures ranging from 200  °C to 600  °C. Also there was no change in the failure modes with the increase in the temperature where the failures under uniaxial tension were tension failure. The uniaxial compressive strength of plain HSHPC was not decreased after 200 and 300  °C. The brittleness-stiffness of HSHPC specimens between 200  °C and 300  °C is higher than that above 400  °C. The temperature around 400  °C is critical to the ultimate strength that decreases rapidly. The increasing extent of the triaxial to uniaxial compressive strength depends on the stress states, the stress ratios, and the brittleness-stiffness of HSHPC after different temperatures. M.I. Khan, C.J. Lynsdale (2002): the corrosion of steel reinforcement is a common cause of deterioration in reinforced concrete. The use of blended cements or supplementary cementing materials decreases the permeability, thereby increasing the resistance of concrete to deterioration by aggressive chemicals. The investigation carried out by Khan and Lynsdale (2002) aimed at developing HSC and carryout investigation into the optimisation of blended cementitious system for the development of HSC. PFA at 0%, 20%, 30% and 40% (by weight) was incorporated as partial cement replacement. To these blends, 0%, 5%, 10% and 15% SF replacement levels were incorporated to make various binary and ternary cementitious combinations. Cube compressive strength and cylinder splitting strength test was carried out and the oxygen permeability was measured using the given equation: From the experimental results it was noticed that as curing age increases, the reduction in strength with increasing PFA content becomes less apparent, especially for PFA contents J.J.Brooks, M.A. Megat Johari, M. Mazloo (2000): Chemical admixtures play a vital role in the production of High-strength concrete. Metakaolin (MK) is one of the new admixture commercially introduced. It is very important to know the setting characteristics of concrete as it helps in the scheduling of concrete construction operations. In this research the effect of chemical admixtures and shrinkage reducing admixtures (SRA) on the setting time of HSC was investigated using the penetration resistance method (ASTM C 403). The penetration resistance (P) of all the different concrete mixes was expressed as P=aebt i.e. P was expressed as the exponential function of time. The general effect of the admixture retarded the setting times of HSC while the SRA had significant retarding effect when used in combination with superplasticiser. As a whole the conclusive statement is that increasing the levels of SF, FA provides greater retardation in the setting time of HSC. 2.2 PREVIOUS WORK ON TENSILE STRENGTH PROPERTIES OF HIGH STRENGTH CONCRETE Tensile strength of concrete is one of the basic and very important properties of concrete. The knowledge of tensile strength is very important in designing concrete structure. Various tests have been carried out in order to determine the tensile strength of concrete. Traditional direct tensile strength test are not commonly acceptable as it suffers many drawbacks. In these tests there is huge stress concentration near the grips and non uniform distribution within the sample. Researches have shown that results from such experiment are low and coefficient of variation is low. Hence more research has been carried out in order to find the true uniaxial tensile strength of concrete. Zhuhai lin and Laurence Wood (2003): After the proposal of correction factor by Raoof and Lin (1999), further research into the correction factor was carried out by Lin and Wood in 2003. In this research assuming uniaxial tensile strength and properties of the concrete, the Brazilian cylinder splitting test was analyzed by the isoparametric nonlinear finite strip element. The result from the research showed that at the onset of cylinder failure the tensile strength along the vertical diameter of cylinder was smaller than the assumed uniaxial tensile strength which means the splitting test underestimates the uniaxial tensile strength of concrete. The study also showed the effect of width of packing strip together with the ratio of (ft/fc) for the compressive strength constant at 30 N/mm2 and showed a linear relationship. According to Lin and Wood the range of correction factor for 30N/mm2 is about 1.09 to 1.40 for packing strip of 12mm, 1.10 to 1.44 for 13mm width, 1.09 to 1.41 for 14 mm and 1.09 to 1.39 for 15mm packing strip width V. Ramakrishnan, Y. Ananthanayayana, K. C. Gopal : As we already mentioned that different test have shown different values of tensile strength for the same concrete mix. V. Ramakrishnan and his associated carried out a research to compare the results in the various tests and to study the uniformity of the results. In this research over 600 specimens were tested for 28 days target strength. A comparative analysis of tensile strength test was carried out and the results were compared against cube compressive strength as shown in the plot above. After laboratory work it was found that modulus of rupture does not give the true tensile strength but only gives the highest value of tensile strength and lies between 1.3 to 2 times the cylinders splitting strength. The cylindrical splitting test was taken satisfactory as it gave more uniform and consistent results than other tensile strength tests. M.F.M. Zain et al: computation of correction factor for the determination of true tensile strength of HSC depends upon the compressive strength of HSC. It is very important to show the relationship between tensile splitting test and compressive strength of HSC. Zain and associates carried out a research in 2002 in order to determine the relation of splitting tensile strength of concrete with compressive strength, water/binder (W/B) ratio and concrete age. After the investigation a relationship between tensile strength, compressive strength and concrete by age was proposed which is . Plot for this relation is given below. The relation given above for the prediction of tensile strength of concrete was compared with French code, ACI code and CEB/FIP code and found to be very close. Hence this equation can be helpful in estimating the Splitting tensile strength of HSC. S Bhanja, B Sengupta(2005): Our research aims to use silica fume as one of the mineral admixture on HSC mixes. Many researches have been carried out to investigate the mechanical effect of silica fume on HSC but very few are carried out in order to analyse the effect of silica fume on tensile strength of concrete. S. Bhanja (2005) carried out research to develop a better understanding on the isolated contribution of silica fume on the tensile strength of concrete. In this experiment 32 mixes with silica fume binder ratio from 0.0 to 0.3 were tested for 28 days strength. From the research it was found out that the use of silica fume improves the tensile strength of concrete and depends upon the water cementitious material ratio of mix. Flexural strength showed greater development than splitting tensile strength. Two expressions were developed to establish the relationship between flexural strength, split tensile strength and compressive strength of silica fume concrete. It was also established that increase in tensile strength beyond 15% of silica replacement was almost irrelevant. 2.3. TENSILE STRENGTH TESTING OF HIGH STRENGTH CONCRETE Although concrete is not normally designed to resist direct tension, the knowledge of tensile strength is of value in estimating the load under which the crack will develop. One of the most well known mechanical properties of concrete is that the tensile strength is 8 to 10 times less than compressive strength. Because of such a low tensile strength, the crack can be seen on the surface of concrete structure. Tension failure is still one of the most important issues because it influences the serviceability significantly. Tensile strength is one of the most important parameters used to evaluate tensile failure of a concrete. Tension tests are needed for concrete as complement to standard compression test in order to obtain a better assessment of structural performance. According to various research and literature review carried out it has been revealed that direct tension test are unsuitable as the results from such tests suffer from inconsistencies due to several uncontrolled variables. It is difficult in this test to avoid stress concentration near the grips and non-uniform stress distribution within the sample. Evans and Wright confirm that the results obtained in the direct tension test of concrete are low and the coefficient of variation is great. Hence this type of test is no longer accepted as reliable. The splitting test is rather simple to perform, does not require other equipment than that needed for the compression test, and gives an approximately similar value of the true tensile strength of concrete (Neville, 1971). According to investigation of splitting tensile strength carried out by O,Neil (2002) , the addition of silica fume, high-range water reducing admixtures and special curing conditions the tensile strength of the concrete wa s higher than that of conventional concrete. The tensile tests that are commonly used and that has been used in this project are detailed in full below: 2.3.1. MODULUS OF RUPTURE OR FLEXURE TEST A direct application of a pure tension force, free from eccentricity is difficult, and is further complicated by secondary stresses induced by the grips or by embedded studs. Because of these difficulties, it is preferable to measure the tensile strength of concrete by subjecting a plain concrete beam to flexure. This is in fact one of the two standard tension tests. The theoretical maximum tensile stress reached in the bottom fibre of the test beam is known as the modulus of rupture. The value of modulus of rupture depends on the dimensions of the beam and, above all, on the arrangement of loading. Two systems are used: a central point load, which gives a triangular bending moment; and symmetrical two-point loading, which produces a constant bending moment between the load points. Since concrete consists of elements of varying strength, it is to be expected that two-point loading will yield a lower value of the modulus of rupture than when one point load is applied. The centre- poin t loading has been discontinued both in United Kingdom and the U.S. Figure 4 Two point flexure test BS 1881: Part 4:1970 prescribes third-point loading on 150 by 150 by 750mm beams supported over a span of 600mm but when the maximum size of aggregate is not more than 25mm, 100 by 100 by 500mm beams with a span of 400 mm may be used. There are four possible reasons why the modulus of rupture test yields a higher value of strength than a direct tensile test made on the same concrete. The first one is related to the assumption of the shape of the shape of the stress block. The second one is that accidental eccentricity in a direct tensile test results in a lower apparent strength of the concrete. The third is offered by an argument similar to that justifying the influence of the loading arrangement on the value of the modulus of rupture. Fourthly, in the flexure test, the maximum fibre stress reached may be higher than direct tension because the propagation of a crack is blocked by less stressed material nearer to the neutral axis. Thus the energy available is below that necessary for the formation of new crack surfaces. The requirement for ASTM Standard C 78 75 are similar to those of BS 1881: part 4: 1970. If fracture occurs within the central one-third of the beam the modulus of rupture is calculated on the basis of ordinary elastic theory, and is therefore equal to PL/ (bd2). Where P= the maximum total load on the beam L=span b= width of the beam d= depth of the beam. If however fracture occurs outside the load points, e.g. at a distance a from the near support, a being measured along the centre line of the tension surface of the beam, then the modulus of rupture is given by 3pL/(bd2). This means that the maximum stress at the critical section, and not the maximum stress on the beam, is considered in the calculations. 2.3.2. CYLINDER SPLITTING TEST The splitting tensile test is used worldwide to measure the tensile strength of concrete. In splitting test a cylindrical or prismatic specimen is compressed along two diametrically opposed generators as shown in the in Figure 5 to prevent multiple cracking and crushing at the points of loading, the load is distributed through two bearing strips whose width differs in the various standards. If the material behaviour is linear-elastic, this geometry leads to nearly uniform tensile stress alone the plane of loading, and the expected rupture mode is the splitting of the specimen in two halves across that plane. In the case of concentrated loads, the maximum tensile stress on this plane can be calculated by à Ã†â€™ max = Where à Ã†â€™ max is the maximum tensile stress in the specimen when the applied load is P, D and B are the specimen depth and thickness respectively. Figure 5 Specimen positioned in a testing machine for determination of splitting tensile strength. Following the standards the maximum tensile stress at failure is a material property called splitting tensile strength. If the load-bearing strips are narrow enough to consider the loading concentrated, and the material behaviour is linearly-elastic -brittle is close to the tensile strength determined by ideal uniaxial tensile test. The tensile strength is evaluated in the standards by fst = Where Pu is the maximum load recorded during the test. The splitting tensile strength is then calculated on the assumption of a hypothetical load bearing strip of zero width. One of the main advantages of the splitting test is that only external compressive loads are required. A cylindrical or prismatic specimen is compressed along two diametrically opposed generators so that a neatly uniform tensile stress is induced in the loading plane. To avoid local failure in compression at the loading generators, two thin strips, usually made of plywood, are placed between the loading platens and the specimen to distribute the load. The specimen fails by splitting because of the induced tensile stress state. The maximum value of the tensile stress, computed at failure from the theory of elasticity, is the splitting tensile strength, ordinarily assumed in the standards to be a material property. The splitting test is simple to perform and gives more uniform results than other tension tests. The strength determined in the splitting test is believed to be closer to the true tensile strength of concrete than the modulus of rupture the splitting strength is 5 to 12 percent higher than the direct tensile strength. It has been suggested, however, that in the case of mortar and lightweight aggregate concrete, the splitting test yields too low a result. With normal aggregate, the presence of large particles near the surface to which the load is applied may influence the behaviour. According to Minders et al, 2003 as the age and strength increase the ratio of tensile to compressive strength decreases (figure ..) Probably due to the effect of drying shrinkage cracks air curing when compared with moist curing reduces the tensile strength more than the compressive strength.

Computer Games Addiction Essay

There are five aspects of internet addiction noted by Shaw and Black (2008): Cyber sexual addiction, cyber-relational addiction, net compulsions, information overload, and computer addiction. The main subtype we will be looking at is computer addiction, as it is described as â€Å"Many computers come equipped with pre-programmed games and people become addicted to playing them at the cost of work performance or family obligations†. There is a lot of controversy over the overlap of devices in gaming, which has resulted in an ambiguous definition for computer games and computer game addiction. For instance, a game that was made for a video game console now has an internet version, a computer game has moved onto the tablet, gambling has also moved to the internet, etc. We will extend their definition to include all computer games playable on a web-enabled device that is not a video-game console, as computer games are recreational activities that are meant to be enjoyed, and outsi de of educational games have little productive value. The following are in depth examinations of computer-game addiction symptoms as studied by researchers as well as real life-examples. Running Head: Persistence, or behavioral salience, is an activity that dominates a person’s behavior to the point that self-maintenance is neglected. In 1938, Skinner created a device that allowed rats to push a lever that would release a pellet into their cage. Once the rats realized that the action of pressing the lever resulted in a reward, they continued to press the lever until exhaustion. Doing so demonstrated an aspect of operant conditioning called positive reinforcement, in which a reward stimulus will result in the continuation or increased frequency of a behavior. In Loftus and Loftus’ (1983) study, they found similar behavior in humans, except with video arcade games such as Pac-man and Invaders. The reward stimulus is often a higher score, accomplishing a task, or defeating a virtual enemy which causes a feeling of achievement. People would gain injuries by standing in front of a machine for hours and repeatedly moving a joystick or pushing buttons, resulting in blisters, callouses, etc. These injuries were given humorous names, such as Pac-man’s Elbow which refers to a mild form of tendinitis. These injuries have become more varied across different platforms for gaming and computing usage. Commonly cited injuries include tired eyes, carpal tunnel syndrome, etc. due to staring at a computer screen and repeating the same keystrokes when playing. Besides repeating an action to the point of self-harm, computer game addiction is more associated with ignoring bodily needs in favor of playing. The BBC (2005) posted an article about a man in South Korea who played for 50 hours straight in an internet cafà ©, and eventually collapsed from exhaustion. He died in the hospital from heart failure. There are several reports of gamers refusing to use the bathroom or using a bottle to release their urine, and eating little food or snacks to nourish themselves; all to remain in front of the computer for a while longer (Chappell et al., 2006). Many of these stories usually stem from developed countries in Asia such Running Head: COMPUTER GAME ADDICTION Poon 8 as China, South Korea, and Japan where computer gaming is more accepted and popular than in the United States. For instance in South Korea, StarCraft is a popular spectator sport and one needs a license in order to qualify to play as a pro-gamer. Computer Game Addiction has been recognized as a formal disorder in these countries, and the government has taken steps against it by creating programs and clinics to battle against it. In South Korea, after repeated incidents of self-neglect leading to death, and the death of a child that was neglected by its parents, they have enacted policies to fight against computer addiction(Cho, 2010). These policies include opening several counseling centers, boot camps for addicted children and teenagers during summer and winter break, and people under eighteen being prohibited from playing in internet cafes between midnight and 8 am (Bosker, 2010; Cain, 2010). China has also enacted policies that include opening treatment centers and requiring minors to use their government IDs to track and shorten usage (Sung, 2009). The government targets the young, as they are under the care of their parents and are also at risk for computer game addiction (Thomas and Martin, 2010). The popularity and acceptance of computer games in developed Asia, as well as their policies against computer game addiction could be a possible future for America. Risked Relationships In addiction, one may drift away or alienate one’s close relations in favor of the substance or activity. In a two case study by Griffiths (2010), he examined two different sides of the social aspects of computer gaming. The first case featured Dave who began to play World of Warcraft for ten to fourteen hours a day after finishing his degree and before getting his first job. Although he played excessively, he was able to gain and maintain new friends through the game, only played because he was in a situation with a lot of time, and eventually dropped out of playing when he formed new commitments in real life. In the second case, a married man with two Running Head: COMPUTER GAME ADDICTION Poon 9 children named Jeremy, was interviewed. He claimed that he played in order to escape from his problems. In the midst of his addiction he played up to fourteen hours a day, began to lose his close connection with his wife, and called in sick at work in order to play more. He eventually lost his job and his wife. He has since been referred to a clinical psychologist. Although Dave played as excessively as Jeremy, he was able to stop playing and it did not ruin his life. Jeremy’s gaming ended up being both the solution and problem that caused a vicious cycle of abuse which resulted in him losing his family and his work. It has also been reported that several parents have neglected their children in favor of computer and/or internet games. In the case of the Kims, they played a game named Prius, a fantasy, Massive Multiplayer Online Role-playing game (MMORPG). They raised a virtual child named Animus in the game, while only feeding and changing their child in between gaming sessions. The child died due to malnourishment, and they were sentenced to jail. Another parent, a single mother, played a social game named Small Worlds, and neglected her small children and two dogs. The children fed themselves from bean cans every day, and the two dogs died from malnourishment. Gamers often become too invested and immersed in their games, and as they play longer hours they begin to lose contact with their real world relationships. Although in Dave’s experience, in which he displayed excessive behavior, he did not display this addictive symptom. For some gamers, it is possible to play long hours and not be considered addicted, and there are varying levels of risked relationships. In young teenagers, they may simply pass up on family engagement in order to play games (Thomas & Martin, 2010). In the situations of the Kims, Jeremy, and the single mother, they all played excessively and ignored their social responsibilities. The basis of any addiction is the negative consequences that come with using a substance or doing an activity. With pathological gaming, the criteria for it includes resorting to crimes to fund one’s own activity or pay off debts one has accumulated. However, articles in the media indicate a trend that many crimes may occur either due to frustration surrounding the game, or to copycat violent acts from the game. One man in China stabbed his friend because the friend had sold a virtual sword on eBay for money (BBC, 2005). In another case, a mother in Florida shook her 3-month baby to death for crying when she was playing Farmville (CBSNews, 2010). In the instance of grand theft auto, there have been copycats who have set out to repeat the crimes they committed in game; one group of teenagers in Garden City, New York decided to live out the popular action-adventure, crime game named grand theft auto. They committed burglary, beat some men, attempted to steal a car, and even punched a police officer in the face. Their only motivation was that they were bored (Crowley, 2008). There is a media stereotype that violent games will increase a child’s propensity for violence. Markey and Markey (2010) attempted to predict certain personality types that would be most affected by violent video games. They found that those high in neuroticism and low in agreeableness and conscientiousness are susceptible to violent games, but only a few individuals truly act on these impulses in a manner that is noticeable. The individuals that are noted above may have had other disorders which caused them to act in this violent manner. Tolerance Weinstein (2010) conducted a study that looked at levels of Dopamine in both a control group and a group of former ecstasy users. They allowed both groups to play a motorbike-riding computer game and monitored brain chemistry using single-photon emission computed before and after game play. They found that there were increased levels of dopamine in the ventral striatum, which is comparable to amounts produced by amphetamines. Former ecstasy users had little change in brain chemistry, which may be due to tolerance from previous ecstasy usage. The researcher also found that males had greater activation and functional connectivity in the meso-cortico-limbic system than in females. Weinstein (2010) suggests that gaming usage/craving may use the same neurological reward system as substance dependence, that gender differences explain why there are more males playing and addicted to games, and that computer game addicted players may also show reduced dopamine levels after playing computer games due to sensitization. This study may not be very valid concerning the ex-ecstasy group, as they only recruited users and the sample size was small. Thaleman et al. (2007) confirmed these results by examining male computer players of different playing intensities, and seeing how they reacted to computer cues. Using Electroencephalography, they found that the excessive computer game players had stronger cue-reactivity to computer scenes than casual players. They also came to the conclusion that sensitization of the mesolimbic dopaminergic system caused greater computer salience in a similar manner of substance abusers to drugs. Debt In the case of many computer games, you purchase a single game and then you hand out no more money. However, game companies have changed their model to increase profits, and now offer money options to buy more in-game weapons or power-ups, gain advantages within the game, or to renew a subscription to a game. In the case of buying in-game items, children who do not understand money and have access to their parents’ credit card may accidentally rack up a debt (Insley, 2010). They may not understand that money purchased for the game translates into real world money. Furthermore, internet gambling has become increasingly popular and may soon be legal (Jonsson, 2011). It is possible to bid real money and earn money, as well as lose money. The same problems of gambling addiction occur without a casino, and with the convenient use of the computer. Internet gambling may be even worse as it is a solitary activity and it is possible to play for hours or days without anyone seeing or stopping oneself. Furthermore, virtual money that has been converted from real money no longer seems like having monetary value, and thereby creating an inhibiting effect which would cause greater spending. It is harder to determine the difference between 100 dollars and a thousand dollars when it is on the screen, and there is nothing physical within one’s hands. Emotional Dependence. Emotional stability is dependent on a secure attachment to a person or thing (Arntz, 2006). In Griffiths (2010), the case study of the Jeremy demonstrated one of the motives for playing computer games: escape. Computer players may use computer games as a way to solve emotional problems, and to get away from reality. This may create a self-repeating cycle, as the problem is not solved and only delayed which creates more conflict for the individual and cause them to play more. Stetina et al. (2011) looked at male MMORPG game users and found that they tend to have low self-esteem that use gaming as a way to interact socially. In this manner, some or perhaps many gamers are more emotionally and socially invested in their gameplay than someone who does not need computer games to interact. In Hussain and Griffiths‘ (2009) study, they gave an online questionnaire to online gamers of MMORPGs, and found that they displayed behavioral and psychological dependence to gaming. This attachment to computer games may negatively impact one’s work. Thomas and Martin (2010) looked at Tasmanian secondary and college students and split them into groups depending on game play hours. They found that students preferred playing over spending time with friends and family and doing homework which negatively impacted their Grade Point Average. The researchers also found that the college populations used games to escape their problems or unpleasant feelings as well as to chase a higher score. Emotional dependence may be either symptomatic of addiction, or a cause of computer game addiction. Computer Game Addiction – Symptoms, Treatment, & FAQs What is computer game addiction? Computer game addiction generally refers to an excessive, unhealthy amount of playing computer games.Rather than engaging in the real world, an addicted user devotes the majority of his or her time to gaming. The addicted gamer often isolates him/herself from others, ignores more important responsibilities, and is often obsessed with obtaining higher status / rankings / achievements in his/her favorite computer game. Is computer game addiction a diagnosable disorder? According to the DSM-IV (the current manual for classifying emotional, psychological, and mental disorders), no. Although there have beencalls from some mental health professionals (and parents) to recognize computer game addiction as a â€Å"real† disorder, it has not been granted official diagnostic status. As more research on the effects of excessive gaming is conducted, many believe that it is only a matter of time before computer game addiction is classified as a compulsive behavior similar to gambling addiction. What are the symptoms of computer game addiction? Because there is no official diagnosis of computer game addiction, there is obviously no universally agreed upon list of symptoms. Psychologists and other mental health professionals initially adapted the diagnostic criteria for gambling addiction and used this as a rough assessment tool for computer game addiction. This classification approach is rarely used today and for better or for worse, it is essentially up to the individual researcher or clinician to define the symptoms of computer addiction. Still, there are some signs and behaviors that are almost always included in definitions of computer addiction, such as†¦ †¢Significant interference with school, work, or relationships †¢Often avoiding other commitments in order to keep playing †¢Frequently turning down social invitations in favor of gaming †¢Using most or all of one’s free time for gaming †¢Regularly playing late into the night and which results in poor sleep habits †¢Loss of interest in previously enjoyed activities †¢Regular gaming â€Å"binges† of 8 hours or more nonstop Who is most at risk for computer game addiction? Although virtually anyone who plays computer games could become addicted (see â€Å"Boyfriend or Husband Addicted to Video Games?†), certain groups appear to be more likely to develop unhealthy levels of play. These groups include: †¢Males †¢Children and teens †¢People with other psychological difficulties (e.g., depression, low self-esteem, anxiety) †¢Individuals with long periods of unstructured time (for example, a teen who is not involved in other activities outside of school) †¢Those with higher levels of neurotocism †¢Children who are more impulsive and have weaker social skills See the article â€Å"Video Game Addiciton Risks Factors† for more information. Why are computer games addictive? First, note that some types of computer games are clearly more addictive than others. For example, most research suggests that MMOs (like World of Warcraft) and FPS games (like Call of Duty) are more addictive than racing games and platformers. For a detailed explanation of why this is, please see â€Å"Why are Video Games Addictive?† In brief though, the most additive video games usually employ many well-established psychological principles to encourage longer and longer periods of play. For example, the most addictive computer games†¦ †¢are based on a leveling system that requires only minimal effort to â€Å"level-up† in the early stages†¦which slowly evolves into very long gaming sessions to reach the next stage as the game progresses †¢are open-ended with no clearly defined end †¢require cooperation with other human players to advance in the game†¦which creates a sense of obligation and dedication to one’s teammates†¦which translates into more and more time strengthening characters and improving skills †¢are based on variable-ratio or variable interval schedules of reinforcement that encourages long periods of gaming even in the absence of rewards

The Atlantic Seal Hunt - 1007 Words

The Seal Hunt As a Newfoundlander I strive to hold on to every bit of our culture and history we have left. Newfoundlanders have always been known for their hard work and dedication. We’ve found work in several areas, as the island we live on has given to us. The fishery, Pulp and Paper, and more recently oil and gas. Something we’ve always been part of is the Canadian Seal Hunt. Which takes place off the Gulf areas around the Magdalen Islands and Prince Edward Island. The main hunt on the so-called front usually begins in April off the east coast of Newfoundland. (FAQs: The Atlantic seal hunt, 2009) I am in support of the Canadian Seal Hunt, It’s something that has been a part of our history for years, and it helps many†¦show more content†¦There is an overabundance of seals, by the government setting a quota and people following that they ensure that there will still be a thriving population of seals. (FAQS: The Atlantic seal hunt, 2009). The benefits for Newfoundla nders from the seal hunt are unconceivable; it helps our province become economically stable and our unemployment rates go down. Most importantly with the population control of seal, it would hopefully one day lead to the day where the moratorium is lifted. People have very strong feelings towards the seal hunt. It is one of the most controversial topics in Canada. Many foundations like Greenpeace and Sea Shepard Conservation Society have been fighting the seal hunt in Canada for years. Claiming it’s â€Å"inhuman†. People like Paul McCartney and Heather Mills come to Canada and lay down on the ice with a few baby white coats and tug at your heartstrings trying to convince the world that the seal hunt is killing these baby seals. That is however incorrect, Canada outlawed the killing of white coats in 1987. (FAQS: The Atlantic seal hunt, 2009) Another fight that they have is that the club or the â€Å"hakapik† which is a tool used for killing seals, is a inhuman and has no place in todays world. Yet again this is another incorrect argument. Veterinarians have found that the hakapik, when properly used, is at least as humane as, and often more humane than, the killing methods used in commercial slaughterhouses, which areShow MoreRelatedEssay about Seal Hunting in Atlantic Canada1637 Words   |  7 PagesThe annual hunt of harp seals (Pagophilus groenlandicus) in Atlantic Canada is contested at the start of nearly every season, with celebrities, politicians, and the public actively weighing in on the matter. Within all of the dialogue and debate, there can be a lot of bias and misrepresentation of facts advocating for or against the seal hunt. Thus, the true sustainable aspects of the industry are drowned out and lost due to the sheer amount of controversy surrounding the issue. Sustainability entailsRead MoreSeal Hunting Essay1353 Words   |  6 PagesThe seal hunt has been a controversial topic in Canada for many years. The argument over it is if it should be allowed and continued, or stopped once and for all. The species of seals killed are the Harp Seals. Most of the harp seals killed are 12 days old to 3 months old because that is when they have the most fur and are more defenseless compa red to an adult seal. However, those are also the seals that are going to grow up and breed for the harp seal population when all the old ones pass away.Read MoreSustainability Of Human Want : Atlantic Seals932 Words   |  4 PagesSustainability of Human Want Atlantic seals are hunted and killed humanely and inhumanely every day in Canada. The issue has caused a plethora of controversy in the international community; depicting if seal hunting should cease or continue. In Glavin s An Enviro s Case for Seal Hunt he supports the murder of seals; however, he only supports it for human consumption, but not the sport. Glavin s tone of writing is very biased and his argument is all sorts of information pulled together that doRead MoreCharacteristics Of The Atlantic Walrus1214 Words   |  5 PagesSPECIES PROFILE For Atlantic Walrus Odobenus rosmarus rosmarus Prepared for MSC 276 – Marine Vertebrate Zoology By John Feickert jefeickert137@mail.cfcc.edu Submitted : March 10th, 2017 Names and classification Odobenus rosmarus rosmarus Atlantic Walrus Synonyms: Aivik (Inuktitut), Morzh (Russian), Rostungur (Icelandic), Valross (Swedish) Family: Odobenidae Atlantic Walrus Description The Atlantic Walrus can be best described as a very large seal with 2 large tusks. No other marineRead MoreEssay on Sharks513 Words   |  3 Pagessuch as seals, sea lions, otters, dolphins, and whales. Samuel Gruber in Discovering Sharks writes that the great white consumes marine mammals when they come across a deceased one. Even though the great white has the reputation of a man-eater; they attack thinking that the diver or surfers on a short board are part of its natural prey. The San Francisco area is known as the great white capital, because of the â€Å"Red Triangle.† The red triangle is the breeding ground for its natural prey, seals and seaRead MoreEssay about Melting Ice Caps1307 Words   |  6 Pagesas elsewhere in the world (nrdc.org). Because of this, the ice cap is getting thinner, melting away, and rupturing. Here is an example of this; the largest ice block in the Arctic, the Ward Hunt Ice Shelf, had been around for 3000 years before it started cracking in 2000 (nrdc.org) By 2002, the Ward Hunt has cracked completely through and had started breaking into smaller pieces. The melting ice caps are affecting the earth and its inhabitants in many ways. In this paper, the following conceptsRead MoreConservation Of Whale Carcass1627 Words   |  7 PagesWhile the Japanese government justifies these actions by claiming that the research they are performing is ultimately for better management and conservation of cetaceans, these hunts are unnecessary. Instead of killing whales to perform these tests, there are non lethal research methods that could be used instead. According to the Japanese Whale Research Program under Special Permit in the Antarctic, also known as JARPA II, the data that they collect includes the monitoring of whales and krill abundanceRead MoreShark Finning : The Most Misunderstood Animals1252 Words   |  6 Pagesmost protected shark species in the world, the great white shark, are appearing in shark fin markets (Shi vji). The genetic evidence also shows that some of these fins originated from one of the most highly regulated fisheries in the world – the US Atlantic fishery (Shivji). The U.S. has strict laws prohibiting shark finning, including a fins-attached requirement. However, independent inspectors of U.S. fishing marines report witnessing shark-finning including taking fins off live sharks and thenRead MoreSea Creatures Categorized as Zooplankton, Nekton, and Benthos1151 Words   |  5 Pageshumans and other sea animals are Leopard Seals. Leopard Seals are the second largest species in the Antarctic. The Sea Leopard can be found mainly in Australia, South Africa, New Zealand, and the Atlantic Ocean. It is estimated to live 26 years, some sea leopards live beyond 26 years of age. Leopard seals mainly eat other seals, penguins, fish and krill. The leopard seal is a big animal with a dark grey back and a white stomach. It was given the name ‘leopard seal’ because it has spots on its throatRead More The Greenland Shark Essay examples1300 Words   |  6 Pagescoastal environments to deep-sea habitats. They also live in the warm waters of the tropics to the cold frigid waters of the polar region. The Greenland shark, also known as â€Å"somniousus Microcephalus,† lives in the dark, cold waters of the North Atlantic (I 65). The Greenland shark belongs to the order Squaliforms, more usually known as dogfish sharks. There are 70 species in this order, which includes the spied sharks, spiny dogfish, Sleeper sharks and lantern fish (I 50). Greenland Shark Classification:

Essay about Social Disorginization theory - 1296 Words

Shaw and McKay (1942) focused their research on the rapidly expanding city of Chicago Illinois in the early 1900’s. Cullen and Agnew (2011) stated that the population of Chicago expanded from 1 million people in 1890 to double that size within 20 years. According to Cullen and Agnew (2011) it was in this era of rapid expansion that researches begin to think differently about crime. Cullen and Agnew (2011) stated that the researchers began to think that the understanding of crime may not be found in the studying of an individual criminal traits but the study of the traits of the environment in which a criminal lives and interacts. According to Cullen and Agnew (2011) this led to a question in which researchers thought a possible solution of†¦show more content†¦Park, Ezra, Burgess, and McKenzie (1967) labeled this area the â€Å"zone of transition†. In was in this â€Å"area of transition† that Shaw and McKay’s theory of social disorganization took was formed. The main arguments of the social disorganization theory of crime according to Shaw and McKay (1942) are that crime can be attributed to the absence of community unifying institutions. Social disorganization theory links the cause of crime to these specific neighborhood characteristics. Sampson and Groves (1989) stated that residential mobility, low economic status, ethnic heterogeneity, and family disruption are characteristics that lead to the social disorganization of a community thus, leading to an increase in crime and inherently causing a criminal subculture. Shaw and McKay (1942) focused their research in the â€Å"areas of transition† that had primarily all of the characteristics that led to social disorganization. According to Feldymeyer (lecture, 2/26/2014) the absence of institutions such as: extended family, good school, churches and local neighborhood organizations that cooperative with each other and work together for the betterment of the community as a whole, led to social disorganization. According to Sampson and Groves (1989) because of these neighborhood characteristics and the lack of social institutions of